Glass vacuum Lifter High Quality Vacuum Glass Sucker Lifter 500kg for Insulating Glass Processing Machine

• Customization: Available
• After-sales Service: Yes
• Warranty: 12 Months
• Cup Quantity: 8
• Trademark: SIECC
• Origin: Shanghai, China

Product Description

To make the following technical specifications , According to your company inquiry.

1. Plate parameters provide for vacuum lifter lifting, Usually match with CNC laser cutting machine.

Workpiece information: Metal sheet, AL sheet, SS sheet etc.
The surface of sheet, even, smooth, densification.

Items	Max. weight(kg)	Length(mm)	Width(mm)	Max. Thickness
1	500kg	2400-3000	1500	2mm-12mm
	150kg	2500	1250	2mm-12mm

2,Existing crane mechanical and electrical configuration:
(1) Power supply:380VAC±15%, Frequency:  50Hz ±1Hz, 3-phase system    
(2)Operation manner: Horizontal handling, operate by manual for vacuum suction and release.
(3)Lifting equipment: Driving crane/Jib arm with crane (should be provided by the client)
(4) Jib crane Max. carrying capacity above 500kg
3,Vacuum lifter specification description:
3.1 Equipment specification selection

3.2  Main performance indicators

Model No.	BLA500-6-T;	Maximum load	Horizontal handling 500kg
Overall dimensions	2000mmx800mmx850mm(Approx);	Power input	380V,50HZ, 3 Phase
Model of Control	Suction and release control by manual push-pull valve	Suction and release time	Less than 2s, (Only first suction time slightly longer, about 10~15s)
Maximum pressure	85% Vacuum degree(Approx 0.85Kgf)	Warning pressure	60% vacuum degree(Approx 0.6Kgf)
Security coefficient	S>2.0,(Horizontal lifting)	Net weight	95kg(Approx);
Pressure maintaining (when power failure)	After Power Failure, the holding time when suction plate by vacuum system >10min.;
Safety alarm	When the pressure is lower than the set alarm pressure(60%), Sound and light alarm automatic alarm.
Speed test:	Apply plate ≤2s Release plate≤2s

3.3 Description of the system characteristics
3.3.1 Design standard
        The equipment strictly is accordance with the EU CE standard EN13155:2003, To carry on the design on based of US ASME(Mechanical engineering association)B30-20-2006 standard and Germany UVV18 standard, Main design index is higher than the above standard.
(1)Safety factor: Main design is greater than 2.0,Vacuum system pressure value for calculation is 60%,The actual peak pressure can reach 85% degrees,Set aside about 40% degrees.
(2)Board of  overhang
      To calculated according to the board overhang. (Minimum thickness)
Minimum thickness of plate: 2mm
Max. overhang L= 892mm
See below schematic diagram.

Remarks: If the board handling amount of overhang beyond the maximum allowable value, Can cause irreversible permanent deformation of board.

3.3.2 Suction force calculation :
Dia.230mm.
Single pad max. suction force in theory on horizontal= Effective surface (Theory of area*factor) * calculated pressure(0.6bar). =(0.115*0.115*3.14)*0.6*10000=249N, Approx 249Kgf.
According to the double safety factor, Actually allow the suction pad 249/2=124kgf,  number of 6 total suction force 700kgf.

Note: The holding force mentioned above is calculate on 60% vacuum pressure, maximum vacuum degree of the system will be up to 85% above in a normal working condition.
3. 4 Main Spare parts list and functional description.

Items	Name	Technical Data	Supplier	Quantity
1	Vacuum pump	4 m^3/h, 0.18kw, Max. vacuum 85%	Germany Becker	1 pc
2	Vacuum pad	Normal temperature Suction pad,Ф230mm	Herolift	6 pcs
3	Vacuum gauge	DP-100	Panasonic	1 pc
4	Vacuum No-return	G1/2"	Italy OR	1 pc
5	Vacuum filter	GLQ VF 1/2	Herolift	1 pc
6	Manual Ball Valve	G 1/4",2/2 way	HeroLift	6 pcs
7	Steel structure	Custom-Tailor	HeroLift	1 pc
8	Control handle	Custom-Tailor, The integrated control unit, The surface coating processing	HeroLift	1 pc
9	Vacuum tank	Integration of main beam	HeroLift	1 pc
10	Warning unit	Sound-light alarm, With independent rechargeable battery type.	HeroLift	1 pc
11	Storage support	Standard, A set of two	HeroLift	1 pc
12	The electric box and accessories	Special Edition	HeroLift	1 pc

The device includes the following main components:

1. Vacuum pump:

To choose Germany brand of Becker, Oilless, air cooling, rotary vanes vacuum pump, bleed air rate 4m³/h,  and the max. Vacuum degree up to 85%;to save energy,  small and light,  maintenance-free, etc
Oil free air cooling type rotary vane vacuum pump, connected to 220V,, Three-phase power can produce vacuum, As a core part of vacuum system,  The highest vacuum degree 85%;

1. Vacuum pad:

To suction the work piece surface, Rubber in contact with the workpiece, ensure that won't cause damage to the workpiece surface.        

1. Vacuum filter:

To eliminate the dust and particles in the air flow, ensure the lifetime of the vacuum pump;

1. Vacuum gauge:

To show the vacuum level to the operator, Provide security;  

1. Vacuum pressure switch:

Pump-film type, When insufficient vacuum pressure, To give electrical signal to alarm system.

1. Manual slide valve:

To switch off the access of vacuum pump and suction pads between the air flow, Safety locks ,prevent accidental operation.       

1. Vacuum non-return valve:

 When the system power failure occurs, automatically shut off the vacuum pump and air channel, Lock the vacuum energy of vacuum tank.  Provide enough pressure holding time, ensure the workpiece will not falling in suddenly.

1. Manual Ball Valve:

To manually open or close vacuum pump and suction pads pathway, convenient maintenance.

1. Alarm indicator lamp:

When the suction force of a single set of suction pads is insufficient, The corresponding indicator light alarm.


Pad instruction

3.5 The advantages of the design
Standard design:

1. Vacuum tank.---- When the power failure in suddenly, the pad always can holding the sheet not falling down less than 30 minutes and more.
2. Adjustable pad/beam-----Every two pads are installed on the two sides of the cross beams, each cross beam is moveable on the main beam, and each suction pad is also moveable on the cross beam, which can ensure a same equipment can handling the different sizes metal sheet.
3. More pad design to keep balance and safety handling-----Multipoint suction point can ensure the metal sheet high level not run-off the straight when handling the metal sheet.
4. Buzzer and warning light units and vacuum pressure switch ----- in case of a power failure or vacuum leakage or fails to reach the set pressure, warning unit can control the red warning lights on, At the same time a buzzer sounded, Prompt operator treatment in time.
5.  Ball valve control pad in individually------ Each suction pads are equipped with manual ball valve control opening and close which can ensure a same equipment can handle various specifications plate.
6. Spring cushion---- Suction pad rod up and down each be equipped with a spring cushion, When the plate is uneven,  The spring effect buffer action,  can make the suction pad strength evenly , so as to ensure suction and lifting the safe and reliable.
7. Safety factor---There are 2.0  times safety factor in horizontal

Special advantages

1. Vacuum pump intermittent start-up (Energy saving, extend the life of the pump)----When vacuum reaches to the specified pressure, vacuum pump automatically stops to achieve energy saving; when vacuum pressure is insufficient, it automatically restarts to achieve vacuum compensation.
2. Rotatable design of sucker head-----Especially for curved plate, better suction and handling

10)  Pad special design---- The replacement best price is cheap, portable suction cup sealing ring to save freight